Two-Ram Balers (Twin Ram Balers) for Sale & Rent

Overview

What It Is

A two-ram baler, also called a twin ram baler, uses two hydraulic rams that work in sequence. The main ram compresses material into a dense bale, and a second ram set at a right angle pushes the finished bale out through the tying system.

Because each bale is fully formed and ejected before the next one starts, a two-ram baler can switch from one material to another without mixing them. That makes it the standard choice for recycling operations that bale cardboard, paper, plastics and metals on the same machine, and it packs more material into each bale to improve storage and shipping efficiency.

Two-Ram Baler supplied by USA Compactors

Best For

Recycling and material recovery facilities
Scrap and non-ferrous metal processors
Large distribution centers and warehouses
Manufacturers with several byproduct streams
Paper, plastics and textile recyclers

At a Glance

Also called	Twin ram baler, 2-ram baler
Materials	Cardboard (OCC), paper grades, plastics such as PET and HDPE, aluminum and other non-ferrous metals, textiles
Bale weight	Varies widely by material, from around 1,000 lb to several thousand pounds
Tying	Automatic wire tying
Power	Three-phase electric; confirmed at site survey
Site needs	Floor space for the baler, conveyor and bale storage

Figures are typical ranges. Exact specifications depend on the model we match to your site.

What It Produces

Bales From a Two-Ram Baler

Finished metal bale being ejected from a two-ram baler — A finished bale leaving the machine, tied and ready to move.

Stacked aluminum bales produced by a two-ram baler — Dense, uniform aluminum bales stacked for storage and shipping.

Copper wire bale produced by a two-ram baler — Copper wire baled on the same type of machine.

How It Works

From Loading to Hauling

Material is fed into a wide hopper, usually by conveyor.
The main ram compresses the material against a solid wall to build a dense bale.
The second ram pushes the finished bale sideways through an automatic wire tier.
The chamber is clear for the next bale, which can be a different material.

Your Options

Rent, Buy, or Trade In

Rent

No capital outlay. Delivery, installation and setup are included, and all maintenance and repairs are covered in one flat monthly cost. Upgrade as your needs change.

Rental program →

Buy

New and reconditioned units are available, matched to your waste stream and delivered and installed nationwide. Post-sale service and support are available.

Get a sales quote →

Trade In

Already own equipment? We make a cash offer on your existing compactors and balers, then rent equipment back to you with maintenance included.

Trade-In Program →

Common Questions

Two-Ram Baler FAQ

What is a two-ram baler?

A two-ram baler has two hydraulic rams. One compresses the material into a bale and the other ejects the finished bale through the tying system. It is also known as a twin ram baler.

What is the difference between a two-ram baler and a single-ram horizontal baler?

A single-ram auto-tie baler pushes material through a long extrusion chamber and works best on one material at a time, typically cardboard. A two-ram baler forms each bale against a solid wall, so it handles many materials, including plastics and metals, and makes denser bales.

What materials can a two-ram baler handle?

Cardboard, mixed paper, plastics such as PET and HDPE, aluminum cans and other non-ferrous metals, and textiles. It can switch between materials from one bale to the next.

Who needs a two-ram baler?

High-volume operations that bale more than one material, such as recycling facilities, scrap processors and large distribution or manufacturing sites.

Do you sell two-ram balers?

Yes. Contact us with your materials and volumes and we will match a machine to your operation.

Related Equipment